11. Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, ISO A2/A3 (420.0mm).
Note
• If the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer Informa-
tion on the Main pane to update the printer information.
12. Make sure CPage Size on the Page Setup pane shows the original size as specified in CPaper Size in the Page
Attributes dialog box—in this case, ISO A4.
13. Select the D Enlarged/Reduced Printing check box.
14. Make sure E Fit Paper Size is selected.
15. Click ISO A3 in the I Paper Size list.
Enhanced Printing Options
>
Printing enlargements or reductions
>
Resizing Originals to Match the Paper Size (Mac OS X) iPF6300S
2
78
To Next Page
Loading...
Need help?
General