Canon imagePROGRAF IPF9100 User Manual

Cutter Unit
9. Holding the new Cutter Unit by the Lock Lever (a) and grip (b), push it onto the Carriage until it
clicks into place.
Important
• After installing the Cutter Unit , hold it only by the grip (b) and pull the Cutter Unit forward to make
sure it does not come of f. If the Cutter Unit comes of f, it may damage the printer .
10. Close the T op Cover .
The Carriage moves into position and a conrmation message is displayed regarding resetting
the cut counter .
1 1. Press the OK button.
The printer now goes online.
Maintenance 705

Canon imagePROGRAF IPF9100 Specifications

General

Brand	Canon
Model	imagePROGRAF IPF9100
Category	Printer
Language	English