EasyManua.ls Logo

Canon LBP7200Cdn - Detecting Jams; Jam Detection Outline; Delay Jams; Stationary Jams

Canon LBP7200Cdn
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2
2-12
2.5.2 Detecting Jams
2.5.2.1 Jam Detection Outline
2.5.2.1.1 Outline
0021-1322
The following is the detection sensors for paper, to detect whether there is paper or not, and whether the paper is properly fed.
- Registration detection sensor
- Multi manual feed tray pre registration detection sensor
- Fixing delivery detection sensor
- Loop detection sensor
- Pre-registration detection sensor
- Cassette paper detection sensor
- Multi manual feed tray paper detection sensor
- Delivery full detection sensor
- Paper feeder pre-registration detection sensor
The following is the jam that detected by the host machine.
1. Pickup delay jam
2. Pickup stationary jam
3. Fixing delivery delay jam
4. Delivery stationary jam
5. Fixing wrapping-over jam
6. Inside stationary jam.
7. Duplex re-pickup jam.
8. Door open jam.
2.5.2.2 Delay Jams
2.5.2.2.1 Pickup delay jam 1
0021-1323
If the registration sensor (SR4) cannot detect the paper leading edge after the image format starts until the re-pickup is started.
2.5.2.2.2 Pickup delay jam 2
0021-1324
The manual feed tray pre-registration sensor (SR7) cannot detect the paper leading edge within a specified time after manual feed tray pickup starts.
2.5.2.2.3 Fixing delivery delay jam
0021-2014
The fixing delivery sensor (SR8) cannot detect the paper leading edge within a specified time after the re-pickup starts.
The delivery full sensor (SR15) cannot detect the paper leading edge within a specified time after the registration sensor (SR4) detects the paper trailing edge.
2.5.2.3 Stationary Jams
2.5.2.3.1 Pickup stationary jam
0021-1325
If the registration sensor (SR4) cannot detect the paper trailing edge after the re-pickup is started.
Manual feed trayPickup solenoid SL1 Manual feed trayPickup solenoid control signal DC Controller
Cassette pickup solenoid SL2 Cassette pickup solenoid driver signal DC Controller
Duplex reversal solenoid SL5 Duplex reversal solenoid driver signal DC Controller
Paper feederPre-registration sensor SR1 Paper feeder pre-registration detection signal DC Controller
Registration sensor SR4 Registration detection signal DC Controller
Manual feed trayPre-registration sensor SR7 Manual feed tray Pre-registration detection signal DC Controller
Fixing delivery sensor SR8 Fixing delivery detection signal DC Controller
Fixing loop sensor SR10 Fixing loop detection signal DC Controller
Pre-registration sensor SR12 Pre-registration detection signal DC Controller
Cassette paper sensor SR13 Cassette paper detection signal DC Controller
Manual feedPaper sensor SR14 Manual feed paper detection signal DC Controller
Delivery full sensor SR15 Delivery full detection signal DC Controller
Manual feed trayFeeding clutch CL1 Manual feed trayFeeding clutch control signal DC Controller
Duplex feeding clutch CL2 Duplex feeding clutch control signal DC Controller
Name Signal name Driver

Table of Contents