Canon LBP7210Cdn - J-07] Specifying and Changing the Device Name or Administrator Information

[J-07] Specifying and Changing the Device Name or Administrator Information
You can specify and change the device name or administrator information using the following software.
Web browser (Remote UI)
You can specify the settings by accessing the printer from your web browser via the network.
FTP Client
You can specify the settings by accessing the FTP server of the printer using Command Prompt.
NetSpot Device Installer
You can specify the settings using the Canon software, NetSpot Device Installer, in the supplied CD-ROM.
This section describes the procedure for specifying the settings using a web browser (Remote UI).
NOTE
Specifying the settings using FTP Client
"FTP Client"
Specifying the settings using NetSpot Device Installer
"NetSpot Device Installer"
Display the Printer Status Window.
Click [
] in the Windows task tray, and then select the printer name.
NOTE
When displaying the Printer Status Window from the printer driver
Click [
] (Display Printer Status Window) in locations such as in the [Page Setup] sheet.
Select [Remote UI] from the [Options] menu.
ĺ The Remote UI is displayed.
㻢㻠㻟㻌㻛㻌㻣㻜㻡