[E-07] Loading Paper and Registering the Paper Size
This section describes only the procedure for loading standard size paper (other than Index Cards and envelopes) in the
paper drawer and multi-purpose tray.
Loading Standard Size Paper (Other Than Index Cards and Envelopes) in the Paper Drawer
Loading Standard Size Paper (Other Than Index Cards and Envelopes) in the Multi-purpose Tray
See the following items when loading non-standard size paper.
"Loading Index Cards"
"Loading Envelopes"
"Loading Custom Size Paper (Non-Standard Size Paper)"
Loading Standard Size Paper (Other Than Index Cards and Envelopes) in the Paper
Drawer
The following standard size paper (other than Index Cards and envelopes) can be loaded in the paper drawer.
Paper Type Paper Size
Plain paper (60 to 90 g/m
2
)
Heavy paper (86 to 163 g/m
2
)
A4 (210.0 mm x 297.0 mm)
B5 (182.0 mm x 257.0 mm)
A5 (148.0 mm x 210.0 mm)
Legal (8.50 in. x 14.00 in.)
Letter (8.50 in. x 11.00 in.)
Executive (7.25 in. x 10.50 in.)
Foolscap (8.50 in. x 13.00 in.)
Statement (5.50 in. x 8.50 in.)
Label
Coated paper
A4 (210.0 mm x 297.0 mm)
Letter (8.50 in. x 11.00 in.)
Step 1: Loading Paper in the Paper Drawer
Step 2:
Registering the Size of Paper
IMPORTANT
Detailed information about usable paper
"Usable Paper and Unusable Paper"
Handling the paper drawer
"Paper Source"
NOTE
How to load paper in Drawer 2 (optional paper feeder)
Load the paper in Drawer 2 in the same manner as you load the paper in Drawer 1.
㻣㻣㻌㻛㻌㻣㻜㻡
To Next Page