[A-02] Power Supply
WARNING
Do not damage or modify the power cord. Also, do not place heavy objects on the
power cord or pull on or excessively bend it, as this can cause electrical damage,
resulting in fire or electrical shock.
Keep the power cord away from all heat sources. Failure to do so can cause the
power cord insulation to melt, resulting in a fire or electrical shock.
The power cord should not be taut, as this may lead to a loose connection and
cause overheating, which could result in a fire.
The power cord may become damaged if it is stepped on, fixed with staples, or if
heavy objects are placed on it. Continued use of a damaged power cord can lead to
an accident, such as a fire or electrical shock.
Do not plug or unplug the power plug with wet hands, as this can result in
electrical shock.
Do not plug the power cord into a multiplug power strip, as this can result in a fire
or electrical shock.
Do not bundle up or tie up the power cord in a knot, as this can result in a fire or
electrical shock.
Insert the power plug completely into the AC power outlet. Failure to do so can
result in a fire or electrical shock.
If excessive stress is applied to the connection part of the power cord, it may
damage the power cord or the wires inside the machine may disconnect. This could
result in a fire. Avoid the following situations:
Connecting and disconnecting the power cord frequently.
Tripping over the power cord.
The power cord is bent near the connection part, and continuous
stress is being applied to the power outlet or the connection part.
Applying a shock to the power connector.
Do not use power cords other than the one provided, as this can result in a fire or
electrical shock.
As a general rule, do not use extension cords. Using an extension cord may result
in a fire or electrical shock.
CAUTION
Do not use a power supply voltage other than that listed herein, as this may result
in a fire or electrical shock.
Always grasp the power plug when unplugging the power plug. Do not pull on the
power cord, as this may expose the core wire of the power cord or damage the cord
insulation, causing electricity to leak, resulting in a fire or electrical shock.
Leave sufficient space around the power plug so that it can be unplugged easily. If
objects are placed around the power plug, you may be unable to unplug it in an
emergency.
㻥㻌㻛㻌㻣㻜㻡
To Next Page