Printing
from
the
Memory Card
Changing
the
Other Settings
This section explains the setting menu in the Device settings.
1 Turn on the printer.
2 Press the Menu button.
3
Use
the
~
buttons to select
Tool
box
and then press the
OK
button.
4
Use
the
~
buttons to select Device
settings
and then press the
OK
button.
For
the rest
of
the procedures
t
see
each
setting menu.
Date display
You
can
change the format for
printing
the date.
(1)
Use
the'"
buttons to select Other
settings
and then press the OK button.
(2)
Use
the buttons to select Date
display
and then press the
OK
button.
(3) Use
the'"
buttons
to
select the date display
format
and then press the
OK
button.
~
Note
The
shooting
date format is
as
specified in the
DPOF
setting
from
DPOF
print.
Adjust
contrast
You
can adjust contrast
of
the
LCD
t
if
it
is too high or too low. This adjustment
does
not
operate
on
printings.
(1) Use
the'"
buttons
to
select
Other
settings
and then press the OK button.
(2)
Use
the'"
buttons to select Adjust contrast and then press the OK button.
(3) Use
the'"
buttons to increase
or
decrease contrast and then press
the
OK
button.
Slide show
setting
You
can
select whether to display photos quickly or in fine detail during the
slide show.
(1) Use
the'"
buttons to select
Other
settings
and then press
the
OK button.
(2) Use
the'"
buttons to select
Slide
show
setting
and then press the
OK
button.
(3) Use
the
buttons to select Image
quality:
Std or Image
quality:
High and then
press the
OK
button.
43
To Next Page
Loading...
