Troubleshooting
Cannot
Print
Properly
through
Wireless
Communication
Possible Cause
!TryThis
The
infrared Place the printer at a distance
of
7.9
inch/20
em
from the mobile
communication distance phone or the
PDA.
orthe Infrared Port angle Ensure
that
the Infrared Ports are at a proper angle and there are
is incorrect no obstacles between them. Retry printing.
The
allowable distance and angle for infrared communication
depend
on
the functions
of
the mobile phone or the
PDA
in addition
to environmental conditions.
See
"Performing Infrared Communication"
on
page 53.
Your mobile phone or
Use
models equipped with
an
IrDA
port
and support image data
PDA
is not able to make a
transmission via infrared communication.
suitable connection
(For
Infrared Communication)
The
mobile phone or the
Place
the mobile phone or the
PDA
within
33
feet (10m)
of
the
PDA
is too far away from
printer when attempting to
print
via a wireless communication.
the printer
(For
Bluetooth
communication)
The
printer is installed
in
You
can
establish a connection between a mobile phone or a
PDA
an
incorrect location
(For
and the printer up to a distance
of
approximately.33 feet/10m for
Bluetooth Bluetooth communication, however the following conditions may
communication) affect both your ability
to
establish a connection and the
connection speed:
• Obstructions or electric devices placed between the printer and
your mobile phone or
PDA
• Locations where magnetic fields, static electricity, or radio wave
interference are present
•
The
sensitivity and antenna efficiency
of
your mobile phone or
PDA
Try
changing the location
of
the printer or moving the mobile phone
or
the
PDA
closer to the printer.
The
device you are using
The
printer cannot connect
to
devices
that
use a different standard
is compatible with a (profile) for printing, even
if
they are Btuetooth compliant. Refer to
different standard
(For
the user's manual
of
your mobile phone or
PDA
to
see
which
Bluetooth profiles
it
is compatible with.
communication)
You
have not selected
You
can
confirm the printer name
at
Device name
in
the Bluetooth
the correct printer at settings menu. Select the corresponding printer name at your
your mobile phone or mobile phone or
PDA.
PDA
(For
Bluetooth
communication)
W Note
This printer cannot print data from a
PC
via Btuetooth communication.
To Next Page
Loading...
