Printing Photographs from a Wireless Communication Device
W
Notes
•
In
order to
use
infrared communication, your mobile phone or
PDA
must satisfy the
following requirements:
-
The
mobile phone or
PDA
must have
an
IrDA
port and
be
compatible with image
data transfer using infrared communication.
- Printable contents: Image taken with a camera-equipped mobile phone or
PDA.
•
For
the procedure to print from your mobile phone or
PDA,
refer to the manual
of
your mobile phone or
PDA.
•
Do
not place any obstacle between the infrared ports
of
the printer and mobile
phone or
PDA.
Data cannot
be
transmitted between them.
• During printing,
be
careful not to interrupt infrared communication with the printer.
If
it
is
interrupted, send the data from the mobile phone or the
PDA
again.
• Depending
on
your device, the
Fine
print quality option may not
be
available due to
the restriction on the infrared transfer capacity.
•
We
recommend printing
on
sticker or credit card-sized paper when the print quality
on other types
of
paper is not fine.
About transmittable data
• It does not support printing a downloaded content or photo and a photo attached
to
an
E-mail for security reason.
•
It
does not support printing video files.
• Depending
on
your device,
it
may not print data stored in a memory card.
• Depending
on
the size
of
a photo,
it
may take a while for this printer to start to print
after starting the infrared transfer.
• It automatically sets the photo quality and orientation (horizontal or vertical)
according to the photo size.
•
It
automatically sets to the margin according to the photo size.
54
To Next Page
