Printing Photographs from aWireless Communication Device
3 Set the print setting.
See
"Setting
the
Page
Size, Media Type, and Layout When Printing from a
Mobile Phone or a
POA"
on
page 51.
4 Start printing from a mobile phone or a
PDA.
For
the procedure to
print
from your mobile phone or
PDA,
refer to the manual
of
your mobile phone
or
PDA.
• When you select the device name, select the
initial
value "Canon
05810-1".
•
If
you are required to enter the passkey, enter the
initial
value
"0000".
You
can
change the device name
of
the printer or passkey in Bluetooth
settings
on
the printer.
See
"Changing the Bluetooth
5ettings-Bluetooth
settings"
on
page 56.
W Notes
• Communication is possible up to about ten meters depending
on
the conditions
below.
The
printing speed may change depending
on
the following conditions:
- Presence of obstacles between the communication equipment and radio wave
conditions.
- Presence of magnetic fields, static electricity or electromagnetic interference.
- Receiver sensitivity and antenna performance
of
the communication equipment.
•
For
the transmittable data, refer to "About transmittable data"
on
page 54.
• Changing the Bluetooth Settings-Bluetooth settings
You
can change settings such
as
device name
of
a
printer
and passkey in
Bluetooth settings.
1
Turn
on the printer.
2 Connect the Bluetooth
unit
BU-20 to the Direct Print Port.
W Note
The
BLuetooth settings screen is displayed only when the optional Bluetooth unit
BU-
20 is attached to the printer.
3 Display the Bluetooth settings screen.
(1) Press the Menu button.
(2)
Use
the
~
buttons
to
select Toot box and then press the
OK
button.
(3)
Use
the
~
buttons
to
select Device settings and then press the
OK
button.
(4)
Use
the'"
T buttons to select BLuetooth settings and then press the
OK
button.
The
BLuetooth settings screen
is
displayed.
56
To Next Page
