Carrier i-Vu CCN Pro 4.2 User Manual

Operating i-Vu CCN Pro
i-Vu CCN Pro 4.2 27
Working with equipment
You can view and adjust equipment operation from the following pages:
Graphics pages
(page 28)
You can view and adjust your essential building
controls on most
Graphics
pages.
Equipment drawings
show the current status of
mechanical equipment.
Adjust
setpoints
(page 33) on a
Graphics
page.
To upload a graphic from ViewBuilder, right-click on
the device in the navigation tree and select
Configure
.
Property pages
(page 31)
You can monitor and control point sources.
1 Select the equipment in the navigation tree.
2 Click
Properties
page >
Equipment
tab.
3 Expand the plus sign next to the desired table.
CCN equipment tables (page 43)
1 In the navigation tree, select the equipment.
2 Click
next to the equipment to expand it.
3 Select the table you want to view.
These tables are not in the system database, but are
dynamically generated from the tables in the device.

Carrier i-Vu CCN Pro 4.2 Specifications

General

Brand	Carrier
Model	i-Vu CCN Pro 4.2
Category	Control Systems
Language	English