Monitor and control equipment
i-Vu CCN Pro 4.2 87
Select
,
,
, or
recorded trend value.
Data is named
differently in some
equipment
Select this checkbox if similar points have different names in
different equipment. Then add each of the names to the
list.
For example, if a point is named Zone Temp in one equipment
and Zone Temperature in different equipment, add both names
to the list.
Select the name of the point to show in the column.
Click to have all columns in the report use the same time
range.
Select the time range to run the report for.
Select the type of calculation to show in the column,
or
.
Data is named
differently in some
equipment
Select this checkbox if similar points have different names in
different equipment. Then add each of the names to the
list.
For example, if a point is named Zone Temp in one equipment
and Zone Temperature in different equipment, add both names
to the list.
Select the name of the point to show in the column.
Click to have all columns in the report use the same time
range.
Select the time range to run the report for.
Select
,
,
,
,
, or
to show in the column.
Data is named
differently in some
equipment
Select this checkbox if similar points have different names in
different equipment. Then add each of the names to the
list.
For example, if a point is named Zone Temp in one equipment
and Zone Temperature in different equipment, add both names
to the list.
Type the GQL expression relative to the current control
program. The GQL expression must return a string value.
To display the
on an equipment's
page, type
in this field.
Trend Samples
A Trend Samples report provides trend values for a particular time frame.
To create a Trend Samples report: