Carrier i-Vu CCN Pro 4.2 - To Acknowledge Alarms; To Delete Alarms

Monitor and control equipment
i-Vu CCN Pro 4.2 55
Field
Notes
Navigation buttons Use these buttons to move through the alarm list.
Additional Actions
You can:
• acknowledge or delete multiple alarms simultaneously
• search for an alarm generated on a particular date and time
NOTE Alarms generated by i-Vu CCN Pro appear at the system level.
To acknowledge alarms
To acknowledge a single alarm:
1 On the Alarms page, select the View tab.
2 Select an alarm that shows Acknowledge in the To Do column.
3 Click the Acknowledge button beneath the list.
To acknowledge all alarms in the selected categories:
1 On the Alarms page, select the View tab.
2 Click Additional Actions.
3 Click All under Acknowledge alarms in selected categories.
TIP Acknowledging many alarms simultaneously can take a long time. Acknowledge alarms as they
occur to avoid long waits.
To delete alarms
To delete a single alarm:
1 On the Alarms page, select the View tab.
2 Select an alarm.
3 Click Delete.
To delete multiple alarms in the selected categories:
1 On the Alarms page, select the View tab.
2 Click Additional Actions button.
3 Click the appropriate button under Delete alarms in selected categories.