Operating i-Vu CCN Pro
34 i-Vu CCN Pro 4.2
• Effective setpoints reflect the impact of other system conditions on the programmed setpoints, such as
setpoint adjustments, and hysteresis. Effective setpoints control the equipment.
To change programmed setpoints:
1 Navigate to a setpoint control in one of the following places:
○ The Space Temperature Setpoints section of the Equipment tab of a Properties page
○ A Graphics page
2 On a programmed setpoint bar, click and drag the segment or the gap between segments you want to
change.
3 Type new values in the Heating and Cooling fields.
TIP You can click and drag a segment or a gap between segments to change setpoints.
4 Click OK.
To Next Page
Loading...
