EasyManuals Logo

Carrier i-Vu CCN Pro 4.2 User Manual

Carrier i-Vu CCN Pro 4.2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
Troubleshooting i-Vu CCN Pro
i-Vu CCN Pro 4.2 93
Command
Description
copy Displays a global copy utility that allows you to selectively copy trend
graphs, custom reports and all editable properties from the selected
equipment to other equipment in the system with the same control
program.
debug Displays information for advanced technical support
go <refname or path> Goes to the point in the system that is referenced.
For example:
go #oa_conditions
or
go vav_1/m28
logoffuser Logs off a user (without warning the user).
Type a whoson manual command to view the IDs of logged in
operators, then type
logoffuser x
, where x is a the user's ID.
modstat Displays status of the controller at the current location, including:
Hardware components of the device
Software components of the device
Error conditions that may exist in the device
Date and time the device is using
notify Sends a message to all operators currently logged in to the system. For
example, "The server is going to shut down in 5 minutes. Please log
off." To run this command, type: notify your message. The
message must use only alphanumeric characters.
ping Ping to verify communication between two IP devices. You cannot ping
devices on non-IP networks. To run this command type: ping
<hostname> where <hostname> is the IP address or device name.
For example:
ping 192.168.168.1
(will ping the IP address 4 times)
or
ping 192.168.168.1 -t
(will ping the IP address constantly)
rebootserver Restarts i-Vu CCN Pro server. You must have the Installer or
Administrator role to run this command.
whereami For the current location, displays the full path and gives the reference
names of the action button, category, item and tab. You use these
reference names when you create links in ViewBuilder.
whoson Shows the list of users currently logged in to the i-Vu CCN Pro system,
the IP addresses from where they are logged on, what kind of interface
they are using (for example, lvl5 for an Internet browser on a
computer), and how long it has been since they have actively
interfaced with the i-Vu CCN Pro system.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Carrier i-Vu CCN Pro 4.2 and is the answer not in the manual?

Carrier i-Vu CCN Pro 4.2 Specifications

General IconGeneral
BrandCarrier
Modeli-Vu CCN Pro 4.2
CategoryControl Systems
LanguageEnglish

Related product manuals