To Next Page
R
Robert MorrisSep 9, 2025
What to do if CAS Accessories show Err 24?
- AAndrea WhiteheadSep 9, 2025
If CAS Accessories show 'Err 24', it means the value of Span is high or low. Adjust the resolution to fix it.
What to do if CAS Accessories show Err 24?
If CAS Accessories show 'Err 24', it means the value of Span is high or low. Adjust the resolution to fix it.
Why CAS Accessories show Err 11?
CAS Accessories may show 'Err 11' because the unit of weight is different. This means the unit of weight calibration is not the same, preventing further processing.
What to do if CAS Accessories show Err 32?
If your CAS Accessories display 'Err 32', it means the number of samples is too low. To fix this, either put more samples or decrease the number of samples.
General| Model | NT-200 Series |
|---|---|
| Category | Accessories |
| Display | LCD |
| Brand | CAS |
| Weighing Units | g, oz |
| Power | AC adapter |
Details how to connect the load cell to the indicator.
Outlines the different operational modes available within System Mode.
Provides detailed instructions and settings for the Count Mode.
Explains the settings and procedures for the Percent Mode.
Covers the operations and settings for the Accumulation Mode.
Details the steps for performing weight calibration.
Setting maximum capacity and minimum division for calibration.
Details the zero calibration steps using the PRINT key.
Details the span calibration steps.
Details on connecting the indicator to a PC via COM1.
Explanation of the CAS protocol structure and data format.
Explanation of the Limit protocol structure and data format.
Details the commands for controlling the indicator.
Lists error codes, their reasons, and solutions for troubleshooting.
