Case 845B VHP - Cleaning a Moist Bed Channel

CHAPTER 4 – OPERATING INSTRUCTIONS
4-14
The articulated grader makes the cleaning of wet ditches
a relatively simple operation.
Articulate the frame in the OFFSET position, in such a
way that the rear wheels are on rm ground, while the
front wheels are on the side of the bank.
Move the circle and blade toward the ditch, with the blade
angled in such a way to bring the material toward the road
bed.
If tilt of channel is excessive, to the point that contact of
the wheel with the ground is impossible, try to drive more
inwards or outwards the channel in order to keep both
wheels touching the ground. If the rear wheels should
not touch the channel slope, position the wheels partially
towards the channel, so that the machine is beveled
sufciently to keep the front wheels in contact with the
ground.
Cleaning a Moist Bed Channel