Case 845B VHP - Blade (Moldboard)

CHAPTER 10 – SPECIFICATIONS
10-11
BLADE (MOLDBOARD)
Build from one-piece hot stamped carbon steel. Unique “Roll Away” surround prole. Replaceable bits and cutting edge.
Hydraulic controls for side shift and blade tilt.
Available sizes
12 ft – 3658 x 622 x 22 mm (12 x 24.5 x 0.875 in)
13 ft – 3962 x 671 x 22 mm (13 x 26.4 x 0.875 in)
14 ft – 4267 x 671 x 22 mm (14 x 26.4 x 0.875 in)
Lift above ground .............................................................................................................................. 444.5 mm (17.1 in)
Bank cutting angle max ............................................................................................................................................. 90º
Blade pitch angle
forward (normal) .................................................................................................................................................. 47º
forward (minimum) ............................................................................................................................................... 42º
forward (maximum) .............................................................................................................................................. 87º
845B / 865B Models
Blade Reach (Measured Outside Tires), Non-Articulated Frame)
With circle displacement only:
Right side ...................................................................................................................................................... 847 mm
Left side ........................................................................................................................................................ 834 mm
With blade displacement only:
Right side .................................................................................................................................................... 1221 mm
Left side ...................................................................................................................................................... 1145 mm
With circle and blade displacement:
Right side .................................................................................................................................................... 1494 mm
Left side ...................................................................................................................................................... 1405 mm
With circle, blade displacement and saddle rotated in hole number one:
Right side .................................................................................................................................................... 1817 mm
Left side ...................................................................................................................................................... 1536 mm
Blade Reach (Measured Outside Tires), Articulated Frame)
With machine articulated a full 25º to the right and to the left, add 684 mm for all above dimensions.
885B Models
Blade Reach (Measured Outside Tires), Non-Articulated Frame)
With circle displacement only:
Right side ...................................................................................................................................................... 999 mm
Left side ...................................................................................................................................................... 1112 mm
With blade displacement only:
Right side .................................................................................................................................................... 1500 mm
Left side ...................................................................................................................................................... 1355 mm
With circle and blade displacement:
Right side .................................................................................................................................................... 1945 mm
Left side ...................................................................................................................................................... 1784 mm
With circle, blade displacement and saddle rotated in hole number one:
Right side .................................................................................................................................................... 2158 mm
Left side ...................................................................................................................................................... 1961 mm