CHAPTER 6 – LUBRICATION / FILTERS / FLUIDS
6-5
FLUIDS AND LUBRICANTS
COMPONENTS
CAPACITY
SPECIFICATIONS
Liters US Gal.
Fuel tank
Total capacity 341,0 90.0 Nº 2 DIESEL
Engine oil
Engine Tier 3 (845B / 865B / 885B Models)
With lter change 16,0 4.2
Nº1 ENGINE OIL SAE 15W40 (1030190)
Without lter change 15,0 4.0
Engine Cooling System
Total capacity 32,0 8,4
50% Water + 50% AKCELA PREMIUM
ANTI FREEZE (1060077)
Hydraulic System
Total capacity 180,0 47.5
AKCELA HY-TRAN ULTRA
(For cold climate)
AKCELA AW HYDRAULIC FLUID 68
(For tropical climate)
Hydrauic tank with lter 90,0 23.8
Transmission
845B / 865B Models with ZF transmission
Rell capacity (with lter change) 26,0 6.9
Nº1 ENGINE OIL (1030190)
Rell capacity (without lter change) 25,0 6.6
885B Models with ZF transmission
Rell capacity (with lter change) 36,0 9.5
Nº1 ENGINE OIL (1030190)
Rell capacity (without lter change) 34,1 9.0
845B / 865B Models with FUNK transmission
Rell capacity (with lter change) 25,0 6.6
AKCELA HY-TRAN ULTRA (1040184)
MAT 3505 (MS 1209)
Rell capacity (without lter change) 23,0 6.0
885B Models with FUNK transmission
Rell capacity (with lter change) 28,5 7.5
AKCELA HY-TRAN ULTRA (1040184)
MAT 3505 (MS 1209)
Rell capacity (without lter change) 26,0 6.9
Rear Axle
845B Models
Center compartment 40,0 10.5
AKCELA AXLEPOWER
SAE 80W-90 API GL5 Limited Slip
865B / 885B Models
Center compartment 44,0 11.6
AKCELA AXLEPOWER
SAE 80W-90 API GL5 Limited Slip
Tandem and Brakes
Rell capacity (each) 69,0 18.2
AKCELA TRANSAXLE FLUID
SAE 20W-40
Circle Turn Gear Reducer
Rell capacity 2,80 0.75
AKCELA GEAR 135HEP
SAE 80W90 (1050135)
Grease Fittings
Rear Ripper, Scarier or Dozer Blade – –
AKCELA MOLYGREASE (1070173)
CASE molydisulde grease
Front Axle Wheel Hub and Bearings – –
AKCELA MOLYGREASE (1070173)
CASE molydisulde grease
Environment
Before you service this machine and before you dispose of the old uids and lubricants, always remember the environ-
ment. DO NOT put oil or uids into the ground or into containers that can leak.
Check with your local environmental or recycling center or your dealer for correct disposal information.