3-1
Chapter 3
INSTRUMENTS AND CONTROLS
Some of the following descriptions and instructions refer
to optional items. Consult your CASE dealer with respect
to the optional equipment available for your machine.
To facilitate reading and learning about the instruments
and controls of this machine, it has been separated in 5
groups, as shown in the gure.
GROUP 1
Implement control levers (left side).
Implement control levers (right side).
GROUP 2
Steering wheel, front console, instrument panel (digital),
pedals, ignition switch and front console fuse box.
GROUP 3
Side console fuse box, control lever of manual accelerator,
transmission control lever, switchboard and power takeoff
(all models) and parking brake (only for 845B / 865B / 885B
models with ZF transmission).
GROUP 4
Operator’s seat, seat belt (all models) and parking brake
(only for 845B / 865B / 885B models with FUNK trans-
mission).
GROUP 5
Cab
OPERATOR’S COMPARTMENT
WARNING: When the terms right and left are used in this manual, the reference point is the operator`s post (seat) in
driving position, looking toward the front part of the machine.
To Next Page
Loading...
