CHAPTER 3 – INSTRUMENTS AND CONTROLS
3-46
SEAT BELT
Pull belt from holder. Fasten the belt end into the right-1.
hand buckle.
NOTE: Make sure the belt end and buckle are securely
fastened. Do not pull out the right-hand buckle.
To release the seat belt, push the red button on the 2.
buckle.
Due to specic laws, in some places the machines are
equipped with 3” (76 mm) seat belts.
WARNING: Securely fasten your seat belt. Your machine is equipped with a ROPS cab, ROPS canopy
or ROPS frame for your protection. The seat belt can help insure your safety if it is used and maintained.
Never wear a seat belt loosely or with slack in the belt system. Never wear the belt in a twisted condition or
pinched between the seat structural members.
PARKING BRAKE
(845B / 865B / 885B MODELS WITH FUNK TRANSMISSION)
The parking brake is applied manually.
When the lever is pulled upwards, the mechanism system
allows partial or complete braking (the brake lever system
permits different braking positions).
To release the parking brake, pull the lever slightly upwar-
ds, press the release button (1) and push the lever do-
wnwards.
PARKING BRAKE LEVER
(845B / 865B / 885B MODELS WITH FUNK TRANSMISSION)
To Next Page
Loading...
