CHAPTER 10 – SPECIFICATIONS
10-12
HYDRAULIC SYSTEM
Full hydraulic control, supplied by a “Load Sensing” type gear pump. Closed center circuits. Blade raise cylinders
mounted over the saddle. Saddle lock system by a hydraulic cylinder controlled by a solenoid valve activated by a
switch located on the side console. Relief and check valves for all controls.
Implements ........................................................................................................................... 186,0 LPM (49.0 GPM)
Steering & Brake ..................................................................................................................... 41,8 LPM (11.1 GPM)
Cooling fan .............................................................................................................................. 55,0 LPM (14.5 GPM)
Pressão máxima
Implements ........................................................................................................................... 193 kgf/cm
2
(2800 PSI)
Steering & Brake ......................................................................................................................... 151 bar (2200 PSI)
Cooling fan .................................................................................................................................. 260 bar (3780 PSI)
To Next Page
Loading...
