EasyManua.ls Logo

Case 845B VHP - Component Maintenance: Hinges, Hoses, Wiring, Fire Extinguisher

Case 845B VHP
208 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 7 – MAINTENANCE AND ADJUSTMENT
7-6
CAB HEADLINER
The foam headliner in your cab decreases noise. To keep the headliner in good operating condition, remove dust with
a vacuum cleaner.
IMPORTANT: DO NOT wash the headliner with water. Water can cause damage to the headliner and lower the noise
control capacity of the headliner.
DOORS HINGES
Use graphite to lubricate all hinges.
HOSES AND WIRING
Check all hoses and wiring for damage. If damage occurred, see your dealer for repair or replacement.
FIRE EXTINGUISHER MOUNTING (IF EQUIPPED)
Type of Fire Extinguisher
It is recommended that you have a re extinguisher on
your machine. The re extinguisher shown is available
from your dealer and can be installed on the machine.
This dry chemical re extinguisher has a 5 pound capacity
and is approved for Class A, B and C type res. The ope-
rating temperature is from -65°F a 120°F (-54°C a 49°C).
Inspection and Care
EVERY MONTH It is recommended that you inspect
the re extinguisher once each month for damage and to
insure that the gauge is working correctly.
EVERY 6 MONTHS Have the dry chemical removed
and relled by a re equipment technician.
ONCE EACH YEAR – Have the re equipment technician
inspect the re extinguisher.
IMPORTANT: DO NOT mount the Fire Extinguisher on
any part of the ROPS / FOPS structure. DO NOT make
any modications to the ROPS / FOPS structure.

Table of Contents

Other manuals for Case 845B VHP

Related product manuals