114
Advanced Settings (REC MENU)
*1 Functions that can be assigned depend on the recording mode.
*2 Configure the settings below in order to directly adjust focus with the function ring.
Focus Mode: MF (Manual Focus)
Face Detection: Off
Make-up
Skin Tone: Natural
Other Items: 0
*3 The control dial operates as described below in the M (Manual Exposure)
recording mode.
• When a function other than “Aperture” is assigned to the function ring (page
113), rotating the control dial adjusts aperture.
• When “Aperture” is assigned to the function ring, rotating the dial adjusts
shutter speed.
*4 The functions of the left and right keys change as described below when certain
settings are selected, even if you assigned different functions to the keys.
• When “MF” is selected as the focus mode, the left and right keys perform focus
adjustment.
• When “I Multi” is selected as the AF area setting, the left and right keys shift
the focus area.
• The same function cannot be assigned to multiple controllers (keys, control dial).
• Depending on the recording mode, some functions may not be assignable to the
Control Dial.
L/R Key
*
4
CS Enters the CS Mode.
Page 61
Exposure Corrects brightness.
Page 52
White Balance Adjusts hue.
Page 46
ISO
Changes the ISO sensitivity
setting.
Page 50
Metering Changes the Metering Mode.
Page 55
Self-timer Selects the self-timer time.
Page 45
Motion Shutter
Specifies the Motion Shutter
activation operation.
Page 66
Off
No function assigned to the [4]
and [6] keys.
Operation Setting Description
See page:
To Next Page
Loading...
Need help?
General
