144
Other Playback Functions (PLAY MENU)
Playing a Slideshow on the Camera (Slideshow)
Menu item: Slideshow
Start
Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All except
Z
: All non-continuous shutter (CS) images
T
Only: Snapshots only
» Only: Movies only
» Only: Timelapse only
Time
Time from the start to the end of the slideshow
3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [8] and [2] to select one of the following settings: 1, 3, 5, 10, 15, 20, or
30 seconds, or “MAX”.
If you specify a value other than “MAX”, movies and CS images play from
beginning to end.
When the slideshow reaches a movie or CS image file while “MAX” is selected,
only the first frame of the movie will be displayed.
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change effect.
• Patterns 2 through 4 have different background music, but they all use the
same image change effect.
• Pattern 5 can be used for playback of snapshots only (except for those that
are part of a CS group), and the “Interval” setting is ignored.
• Snapshots that are part of a group are displayed the same as those shot with
the single shot mode, and not as a group.
• The currently selected image change effect setting is disabled automatically
in following cases.
– When playing a slideshow for which “» Only” or “» Only” is selected for
the “Images” setting
– When the interval setting is “MAX” or 1 second
– Before and after playback of a movie
Off: No image change effect or background music
To Next Page
Loading...
