Casio EX-ZR5100 - Using the Control Panel to Configure Camera Settings

44
Snapshot Tutorial
The Control Panel can be used to configure camera settings.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the setting item you want to change, and
then press [SET] or [6].
This will select one of the Control Panel icons and display its settings.*
3. Use [8] and [2] to change the setting.
4. After the setting is the way you want, press
[SET].
This will apply the setting and return to the REC
mode.
NOTE
• You also can use on-screen menus to configure settings other than those listed
above (page 110).
Using the Control Panel to Configure Camera Settings

Self-timer (page 45)

White balance (page 46)

Focus (page 48)

ISO sensitivity (page 50)

Make-up (page 51)

Exposure (page 52)

Flash (page 53)

Metering (page 55)
* Items displayed in the Control Panel depend on the recording mode.
1
5
3
4
7
8
2
6
Control Panel
Example: Configuring
Program Auto settings