Casio EX-ZR5100 - Protecting an Image in a Group against Deletion

152
Other Playback Functions (PLAY MENU)
1. While playback of a CS or interval group is in progress or paused,
press [2].
• This will display the “Edit Group” menu.
2. Use [8] and [2] to select “Protect” and then press [SET].
3. Use [8] and [2] to select the protect method you want to use and then
press [SET].
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 201).
Protecting an Image in a Group Against Deletion (Protect)
Select Frames
Protects specific images within a group.

Use [8], [2], [4], and [6] to move the blue selection
boundary to the image you want to protect.
• You can scroll through images by rotating the zoom
controller.

Press [SET].
This makes the image protected, which is indicated by
“›” on the image thumbnail.
• To unprotect an image, select a protected file and
then press [SET].

Press [MENU] to exit the protect operation.
Frame all
Protects all the images within a group.

Use [8] and [2] to select “All Frames On” and then
press [SET].
To unprotect all of the images in the group, select “All
Frames Off” in step

and then press [SET].