Casio EX-ZR5100 - Adjusting Monitor Screen Brightness; Configuring Camera Sound Settings

194
Other Settings (SETTING)
• Turning on the “ECO Mode” (page 193) while the “Screen” setting is +2 or +1 will
cause the “Screen” setting to change to 0.
• Setting a volume level of 0 mutes output.
Adjusting Monitor Screen Brightness (Screen)
Menu item: Screen
Auto
With this setting, the camera detects available light levels and
automatically adjusts the brightness of the monitor screen accordingly.
+2
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.
0 Normal monitor screen brightness for indoor use, etc.
–1
Low monitor screen brightness for nighttime use, indoor use under dark
conditions, etc.
Configuring Camera Sound Settings (Sounds)
Menu item: Sounds
Startup
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
Operation Vol
Specifies the sound volume. This setting is also used as the
audio level during TV output (page 137).
Playback Vol
Specifies the volume of movie audio output. This volume
setting is not used during TV output (page 137).