Casio EX-ZR5100 - Triggering a Self-Timer Operation with Motion

66
Snapshot Tutorial
With this feature, the camera automatically triggers a self-
timer countdown whenever it detects movement in the
vicinity of an icon on the monitor screen. This means you
can control operation of the self-timer from a distance by
waving your hand, so you can include yourself in the
image being shot.
1. Select one of the following as the recording mode: Program Auto,
Premium Auto Pro, or Make-up.
2. Press [MENU].
3. Press [4], use [8] and [2] to select “r REC MENU” tab, and then
press [6].
4. Use [8] and [2] to select “Motion Shutter”, and then press [6].
5. Use [8] and [2] to select “Motion Settings”, and then press [6].
6. Use [8] and [2] to select “Always” or “180°only”, and then press
[SET].
• If you select “180°only”, go to step 7. Selecting “Always” activates Motion
Shutter. Advance to step 8.
7. If you selected “180°only” in step 6 above, tilt the camera’s monitor
screen 180 degrees (page 19).
This activates Motion Shutter.
8. Press the shutter button (if you want to shoot a snapshot) or
[0] (Movie) (if you want to shoot a movie).
• About three seconds after you press the shutter button or [0] (Movie) button,
the camera will go into standby. This will cause the self-timer icon “ ” to
change from flashing to blue.
9. Facing the camera, move your hand or perform some other movement
in the vicinity of the (start self-timer) icon on the monitor screen.
When the camera detects movement near the icon, it will automatically shoot an
image.
• To stop movie recording, press [0] (Movie) again.
Triggering a Self-timer Operation with Motion (Motion Shutter)