97
Using BEST SHOT
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. In the BEST SHOT Mode, select “HDR” (page 89).
2. Press [SET], and then select the (HDR Level) Control Panel option
(page 44).
3. Select the HDR Level setting you want, and then press [SET].
• You can select one of three HDR levels.
• HDR works best when shooting with the camera mounted on a tripod.
• Shooting with this function causes the flash setting to change automatically to
?
(Flash Off).
• Anti Shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
Digitally Correcting for Overexposure and Underexposure
(HDR)
To Next Page
Loading...
Need help?
General
