68
Snapshot Tutorial
Use the procedure below to configure Motion Shutter settings.
1. In the REC mode, press [MENU].
2. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [6].
3. Use [8] and [2] to select “Motion Shutter” and then press [6].
4. Configure Motion Shutter settings.
Configuring Motion Shutter Settings (Motion Shutter)
Setting Description
Motion
Settings
Specifies the Motion Shutter activation operation.
Always:
Motion Shutter remains activated, regardless of whether or
not the monitor screen is tilted.
180°only:
Motion Shutter is activated when the monitor screen is
tilted 180 degrees.
Off: Motion Shutter disabled.
Timer
Specifies the amount of time that should elapse until
shooting starts after the camera detects movement.
Settings: 0.5 sec, 1 sec, 2 sec, 10 sec
Motion
Position
Changes the positions of the self-timer icon “ ” and
preview icon “ ”.
[8] [2] [4] [6]: Moves the currently selected icon.
[W] (Wireless): Selects the icon to be moved.
To Next Page
Loading...
Need help?
General
