105
Using BEST SHOT
You can use this function to record movies of natural events that occur over time, to
speed up the flow of traffic in a city scene, or to record other similar types of movies.
Time Lapse provides a collection of sample scenes that show various types of
images. Simply selecting a scene causes the camera to set up automatically with
optimal settings for the subject type and conditions shown in the sample scene.
• Normally, you should use the “» Standard” scene.
• When using this function, shooting with a tripod is recommended.
• To prevent loss of power while shooting, use a fully charged battery.
• Make sure the memory card you are using has sufficient unused space before
shooting with this function.
• Focus is fixed at what they are when shooting is started.
• For some scenes, brightness and white balance settings are fixed at what they are
when shooting is started.
1. In the BEST SHOT Mode, select the Time Lapse scene you want to use
(page 89).
2. Press [SET], use [8] and [2] to select the (Time Lapse Settings)
Control Panel option, and then press [SET].
3. Use [8] and [2] to select “ Interval” or “ Total Time”, press [6],
and then use [8] and [2] to change the setting.
Each scene is initially configured with unique “ Interval” and “ Total Time”
default settings. Change these settings, if you want.
Recording a Time Lapse Movie (Time Lapse)
Scene Description
Interval Shot
You can specify the shooting interval and the number of shots.
* page 103
Standard
Lets you view long movies more quickly. You can specify the
shooting interval and time.
Clouds
For images that capture the feel of clouds floating across the
sky.
Sundown Reproduces all the beauty and drama of the setting sun.
Interval Specifies the number of seconds between shots.
Total Time
Specifies the recording time. Selecting “Off” causes
recording to continue until the shutter button is pressed
again.
To Next Page
Loading...
Need help?
General
