Casio EX-ZR5100 - Copying an Image in a Group

135
Viewing Snapshots and Movies
Use the following procedure to copy an image in a group to a location outside of the
group.
1. While CS or interval shot group playback is in progress or paused,
press [2].
This will display the “Edit Group” menu.
2. Use [8] and [2] to select “Copy”, and then press [SET].
3. Use [4] and [6] to display the image you want to copy.
4. Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a group. Before
using either of these functions, perform the above procedure to copy the image
first.
White Balance, Brightness, Trimming, Rotation, Resize
Copying an Image in a Group (Copy)