107
Using BEST SHOT
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then rotate the zoom controller in
either direction.
• To return to the scene menu, rotate the zoom controller
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently
selected scene, press [SET].
You can configure the camera to save a RAW image
* along with a standard JPEG
image when shooting snapshots. RAW image data is stored in a camera folder
named “RAW” (page 191).
* A RAW image is image data (file name extension .DNG) that is unprocessed
internally by the camera. Since there is no image deterioration, RAW files provide
more creative freedom when used with software that supports general-purpose
DNG format files.
1. In the BEST SHOT Mode, select “RAW Image” (page 89).
• The image size is fixed at 12M when shooting with this function.
• Single SR Zoom and Digital Zoom cannot be used with this function. Only optical
zoom can be used, up to a maximum zoom factor of 1.3X (24mm when converted
to 35mm film).
• Shooting of RAW image data is not supported for movie recording.
Shooting RAW Images (RAW Image)
To Next Page
Loading...
Need help?
General
