238
Appendix
Record Error
Image compression could not be performed for some
reason during image data recording. Perform a zoom
operation to change the composition of the image and
shoot it again.
RETRY POWER ON
The lens came into contact with an obstruction while
moving. The camera will turn off automatically when this
message appears. Remove the obstruction and turn power
back on again.
Send failed.
An image send operation could not be performed
completely for some reason.
The card is locked.
The LOCK switch of the SD, SDHC, or SDXC
memory card loaded in the camera is in the
locked position. You cannot store images to
or delete images from a memory card that is
locked.
There are no files.
There are no files in built-in memory or on the memory
card.
There are not
enough images for
this operation.
A Highlight Photo or Highlight Movie could not be
generated because there were not enough files required for
generation.
There is no image to
register.
The setup you are trying to save is for an image that cannot
be saved as a user “Custom Shot” scene.
This card is not
formatted.
The memory card loaded in the camera is not formatted.
Format the memory card (page 201).
This file cannot be
played.
The file you are trying to access is corrupted or is a type
that cannot be displayed by this camera.
This function cannot
be used.
This message will appear part way through an operation
when you attempt to use a function that is not allowed in
combination with another function.
To Next Page
Loading...
Need help?
General
