64
Snapshot Tutorial
• In addition to the P (Program Auto) mode, you can also use the following modes
with Prerecord CS: A (Aperture AE), S (Shutter Speed AE), and M (Manual
Exposure).
• The greater the number of shots, the longer it takes to save them after shooting is
complete.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• Zoom is disabled during continuous shutter operations.
• The snapshot image quality automatically changes to “Normal”.
• Exposure and focus for the first image are applied for successive images as well.
• The flash setting automatically becomes ? (Flash Off).
• The following image sizes cannot be selected: 3:2, 16:9. Entering the High Speed
CS mode while any one of these image sizes is selected will cause the image size
setting to change to “12M” automatically.
• The following functions cannot be used.
Motion Shutter, Triple Self-timer, Multi SR Zoom
• During CS recording some setting items are dimmed on the display and cannot be
selected.
• The Self-timer cannot be used in the Prerecord CS mode.
• If you assign “CS” to the Key Customize (page 113) “L/R Key” setting, you can
change the CS mode by pressing the [4] or [6] key.
To Next Page
Loading...
