124
OTHER RECORDING FUNCTIONS
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “Memory”, and
then press [왘].
3.
Use [왖] and [왔] to select the item you want to
change, and then press [왘].
4.
Use [왖] and [왔] to select the setting you
want, and then press [SET].
To do this:
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
Select this setting:
On
Off
IMPORTANT!
• Note that BEST SHOT mode settings take priority
over mode memory settings. If you turn the camera
off while in the BEST SHOT mode, all settings
except for “Zoom Position” will be configured
according to the BEST SHOT sample scene when
you turn it back on again, regardless of mode
memory on/off settings.
• In the following modes, “ ” (Flash Off) is always
selected as the flash mode regardless of mode
memory on/off setting.
Movie mode, Short Movie mode, Past Movie mode,
MOVIE BEST SHOT mode
To Next Page
Loading...
