USING THE CAMERA WITH A COMPUTER
212
USING THE CAMERA WITH A COMPUTER
This section explains the software and applications on the CD-ROM that comes bundled with the camera, and provides an
overview of what you can do with them.
Note that the procedure you need to perform depends on whether you are using computer running under Windows (see below)
or a Macintosh (see page 227).
Using the Camera with a Windows Computer
Your digital camera comes bundled with useful applications for using it in combination with a computer. Install the applications
you need on your computer.
About the bundled CD-ROM
The CD-ROM that comes bundled with the camera contains the applications described below. Installation of these applications
is optional, and you should install only the ones you want to use.
Purpose
USB connection to a computer for
image transfer
Management of images transferred
to a computer
Software Name
–
USB driver Type B
Photo Loader 2.3
* DirectX 9.0c
Supported Windows Versions
XP/2000/Me
98SE/98
XP/2000/Me/98SE/98
Required Operation
Use the USB cradle to establish a
connection between the camera and
computer. Installation of the USB driver
is not required (page 194).
Use the USB cradle to establish a
connection between the camera and
computer. Install the USB driver
Type
B
(page 194).
Install Photo Loader 2.3
(page 216)
.
* If the computer does not have
DirectX 9.0 or higher installed, install
DirectX 9.0c (page 218).
CD-ROM Software
To Next Page
Loading...
Need help?
General
