78
OTHER RECORDING FUNCTIONS
• Spot • Multi
Focus frameFocus frame
• Free
Focus point
[SET]
Focus frame
Using the Macro Mode
Use the Macro mode when you need to focus on close up
subjects. The following shows the approximate focus range
in the Macro mode.
Range: 10cm to 50cm (3.9˝ to 19.7˝)
• Using optical zoom causes the above range to change.
1.
Press [왖] ( ) to cycle through the focus
mode settings until “ ” is shown as the
focus mode indicator.
2.
Press the shutter button to record the image.
• The focus and image recording operations are
identical to those in the Auto Focus mode.
NOTE
• When the Macro mode cannot focus properly
because the subject is too far away, the camera
automatically switches to the Auto Focus range
(page 75).
• Whenever you perform an optical zoom operation
(page 61) while recording with the Macro mode, a
value will appear on the monitor screen as shown
below to tell you the focusing range.
Example: 10cm - 50cm
B
To Next Page
Loading...
Need help?
General
