123
OTHER RECORDING FUNCTIONS
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the flash mode,
focus mode, white balance mode, ISO sensitivity, AF Area,
metering, self-timer, flash intensity, digital zoom mode,
manual focus position and zoom position. Turning on mode
memory for a mode tells the camera to remember the
status of that mode when you turn off the camera, and
restore it the next time you turn the camera back on. When
mode memory is turned off, the camera automatically
restores the initial factory default setting for the applicable
mode.
— The following table shows what happens when you turn
mode memory on or off for each mode.
*1 The focus mode setting is not remembered for the
Movie mode. PF (Pan Focus) is automatically
selected in the Movie mode.
*2 Only the optical zoom position is remembered.
Function
Flash
Focus*
1
White Balance
ISO
AF Area
Metering
Self-timer
Flash Intensity
Digital Zoom
MF Position
Zoom Position*
2
On
Setting when
camera is
turned off
Off
Auto
Auto
Auto
Auto
Spot
Multi
Off
0
On
Last Auto Focus
position that was in
effect before you
switched to manual
focus
Wide
To Next Page
Loading...
Need help?
General
