87
OTHER RECORDING FUNCTIONS
• This starts the white balance adjustment procedure.
The message “Complete” appears on the monitor
screen after white balance adjustment is complete.
5.
Press [SET].
• This registers the white balance settings and returns
to the currently selected recording mode.
NOTE
• After you adjust white balance manually, the setting
remains in effect until you change it or until you turn
off the camera.
Using the Manual Exposure mode
In the M mode (manual exposure), you can adjust shutter
speed and aperture manually.
1.
Align the mode dial with “M” (Manual).
2.
Press [SET] to select the shutter speed value
(page 28) in the exposure panel, and then use
[왗] and [왘] to change the setting.
Aperture value
Shutter speed value
Manual focus setting
Exposure mode
Shutter speed
Movement
Slow Fast
60 seconds 1/1600 second
Blurred
Stopped
To Next Page
Loading...
