88
OTHER RECORDING FUNCTIONS
3.
Press [SET] to select the aperture value (page
28) in the exposure panel, and then use [왗]
and [왘] to change the setting.
* The above values are full wide angle optical zoom.
Aperture values are different at other optical zoom
settings.
• If you are using manual focus (page 80), you can
also press [SET] to select “FOCUS” (manual focus
setting) (page 28) in the exposure panel, and then
use [왗] and [왘] to focus manually.
4.
Press the shutter button half way.
• This causes the camera to adjust focus automatically.
• If the image is over-exposed or under-exposed, the
shutter speed and aperture setting shown on the
monitor screen will turn amber when you press the
shutter button half way.
5.
When the image is focused, press the shutter
button all the way down to record.
NOTE
• You can also perform the following operation in the
M mode (manual exposure).
1. Press [SET] to select the exposure mode (page
28) in the exposure panel.
2. Use [왗] and [왘] to select “S” (shutter speed
priority AE) or “A” (aperture priority AE).
3. Set the aperture (if you selected “S” above) or
shutter speed (if you selected “A”), and the other
setting will be configured automatically.
• While the “S” or “A” mode is selected, you can press
[SET] to select “EV shift” (page 28) in the exposure
panel, and then use [왖] and [왘] to adjust the EV shift
value (page 83).
Aperture value*
Depth of Field
Wide Small
F2.8, F4.0
Shallow Deep
To Next Page
Loading...
Need help?
General
