OTHER SETTINGS
174
• Mass Storage (USB DIRECT-PRINT) causes the camera
to see the computer as an external storage device. Use
this setting for normal transfer of images from the camera
to a computer (using the bundled Photo Loader
application).
• PTP (PictBridge) simplifies the transfer of image data to
the connected device.
Configuring [ ] (REC) and [ ] (PLAY)
Power On/Off Functions
You can use the following procedures to configure [ ]
(REC) and [ ] (PLAY) so power turns and/or off
whenever they are pressed.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “REC/PLAY”,
and then press [왘].
3.
Use [왖] and [왔] to select the setting you
want, and then press [SET].
To Next Page
Loading...
