BASIC IMAGE RECORDING
70
1. The camera performs a 10-second countdown
and then records the first image.
2. The camera prepares to record the next image.
The amount of time required for preparation
depends on the camera’s current “Size” and
“Quality” settings, the type of memory (built-in or
card) you are using for image storage, and
whether or not the flash is charging.
3. After preparation is complete, the indicator “1sec”
appears on the monitor screen, and another
image is recorded one second later.
4. Steps 2 and 3 are repeated once more to record
the third image.
AF assist light/
Self-timer lamp
5.
Press the shutter
button to record the
image.
• When you press the
shutter button, the AF
assist light/self-timer
lamp flashes and the
shutter releases after the
self-timer reaches the
end of its countdown
(about 10 seconds or two
seconds).
• You can interrupt an ongoing self-timer countdown
by pressing the shutter button while the AF assist
light/self-timer lamp is flashing.
To Next Page
Loading...
