Casio G'zOne Brigade - Alert Sounds; Call Vibrate; Caller ID Readout

137
SETTINGS & TOOLS
Call Vibrate
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press  Sounds Settings,  Call Sounds,  Call
Vibrate.
2. Select On or Off, then press the Center Select Key [SET].
Caller ID Readout
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press  Sounds Settings,  Call Sounds,  Caller
ID Readout.
2. Select one of the following settings, then press the Center Select
Key [SET].
Ring Only/Caller ID + Ring/Name Repeat
Alert Sounds
To select the alert type for a new message:
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press  Sounds Settings,  Alert Sounds.
2. Select TXT Message/Multimedia Message/Voice Mail/
Emergency Tone/Missed Call/PTT Alert, then press the Center
Select Key [OK].
3. Select Tone/Vibrate/Reminder, then press the Center Select Key
[OK].
Tone : Select a ringer, then press the Center Select Key [SET]. To
play the alert tone, press the Left Soft Key [Play].
Vibrate: Select On or Off, then press the Center Select Key [SET].
Reminder: Select Once/Every 2 Minutes/Every 15 Minutes/Off,
then press the Center Select Key [SET].
I
I