55
CONTACTS
2. Select the Contact entry. You can perform the following operations:
To view the contact information, press the Center Select Key
[VIEW].
To unassign the entry, press the Left Soft Key [Unassign].
Press the Right Soft Key [Options] to select one of the following
options:
Call/New TXT Message/New Picture Message/New Video
Message/New Voice Message
Press the Send Key to dial the Default Number of the Contact
entry. If multiple numbers are saved in the Contact entry, select
the phone number you want to dial by pressing the Directional
Key = left or right, then press the Send Key.
Press the Message Composer Key 8 to create a text message
to be sent to the Default Number of the Contact entry as the
destination. If multiple phone numbers and/or e-mail addresses
are saved in the Contact entry, select the phone number or
e-mail address as the destination to which you want to send,
and then press the Message Composer Key 8 to create a
text message to send to the selected phone number or e-mail
address.
Groups
Groups allow you to classify phone entries into groups with up to 10
numbers in each group.
To view your grouped Contacts, add a new group, change the name
of a group, delete a group, or send a message to everyone in the
selected group:
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Contacts, then press the Center Select Key [OK].
Press Groups.
•
•
•
•
•
To Next Page
Loading...
Need help?
General
