152
SETTINGS & TOOLS
Edit Codes
To set a new Lock Code:
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press Phone Settings, Security.
2. Enter the four-digit Lock Code, then press the Center Select Key
[OK].
3. Press Edit Codes.
4. Select one of the following settings, then press the Center Select
Key [OK].
Phone Only: Allows you to edit the Lock Code for the handset
only.
Calls & Services: Allows you to edit the Lock Code for all Calls &
Services.
5. Enter the new four-digit code in the Enter New Code field.
If you selected Calls & Services in step 4, you would also need to
enter the current code before entering the new code.
6. Press the Directional Key / down to advance to the Re-enter
New Code field.
7. Enter the new four-digit code again as confirmation.
8. Press the Center Select Key [SET].
NOTES
The default Lock Code is the last 4 digits of your phone number.
There are two Lock Codes: Phone Only and Calls & Services.
•
•
Restrictions
Use the following procedure to configure Location Setting, Calls,
Messages, and Dial-Up Modem restrictions.
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press Phone Settings, Security.
I
I
To Next Page
Loading...
