Casio G'zOne Brigade User Manual

138
SETTINGS & TOOLS
NOTES
Emergency Tone has the following settings: Alert/Vibrate/Off.
PTT Alert has only two settings: Tone / Vibrate.
•
•
Keypad Volume
To set the keypad volume:
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press  Sounds Settings,  Keypad Volume.
2. Adjust the volume by pressing the Directional Key 5 up or down,
then press the Center Select Key [SET] to save the setting.
Digit Dial Readout
To set whether to read out the numbers being entered when dialing a
phone number:
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press  Sounds Settings,  Digit Dial Readout.
2. Select On or Off, then press the Center Select Key [SET].
Service Alerts
To set any of the three Alert options to either On or Off:
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press  Sounds Settings,  Service Alerts.
2. Select one of the following options, then press the Center Select
Key [OK].
ERI: Alerts you to the status of cellular service.
Minute Beep: Alerts you every minute during a call in progress.
Call Connect: Alerts you when the call is connected.
3. Select On or Off, then press the Center Select Key [SET].

Casio G'zOne Brigade Specifications

General

Brand	Casio
Model	G'zOne Brigade
Category	Cell Phone
Language	English