Casio G'zOne Brigade - Page 62

61
CONTACTS
Press  Speed Dials.
2. Select or enter the Speed Dial number, then press the Center
Select Key [SET].
3. Select the Contact, then press the Center Select Key [OK].
4. Select the phone number you want to assign to the selected Speed
Dial number, then press the Center Select Key [OK]. “Set Speed
Dial to Contact?” appears on screen.
5. Press the Center Select Key [OK] to select Yes.
A confirmation message appears.
NOTE
“Speed Dial is already assigned. Overwrite?” will appear on screen
if you are selecting a speed dial location that is already assigned.
Select Yes or No and press the Center Select Key [OK].
Resetting a Speed Dial
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Contacts, then press the Center Select Key [OK].
Press  Speed Dials.
2. Select or enter the Speed Dial number, then press the Right Soft
Key [Remove].
3. Press the Center Select Key [OK] to select Yes.
A confirmation message appears.
Single-Digit Speed Dialing
1. With the flip closed, to unlock the handset, press the Center Select
Key, and then press  at the prompt.
2. Press and hold the Speed Dial digit.
3. Your handset recalls the phone number from your Contacts,
displays it briefly, and then dials it.