Group calls
PS11366AENAA01 TH1n - User Guide
36/115
This document is the property of Cassidian and should not be copied or circulated without permission.
Folders
Up to 3000 TMO talk groups and 1500 direct mode talk groups can be
programmed in your radio. The talk groups are arranged in folders. One folder
can have up to 200 predefined talk groups and up to 200 dynamic (over-the-
air) talk groups. Five folder can be programmed as My folder enabling you do
create your own collections of talk groups. Only one folder can be selected at
a time, and you can only scan or call those talk groups that are in the selected
folder, with the exception of the home group. See Home group on page 36. In
the idle mode, the name of the currently selected folder is shown on the
display.
To access the list of folders, press in the idle mode, or select
Menu
→
Talk
groups
→
Edit group folders.
A maximum of five folders can be predefined as the user’s My folders, to
which you can copy desired talk groups (see Edit group folders on page 44).
You can also rename the user’s My folders. The user’s My folders may
contain predefined groups. Your organisation may also predefine some
folders as protected, so that only users with certain access rights may view
and select them; see Security settings on page 91. The list of folders has the
following indicators: for protected predefined folders, for
unprotected predefined folders, for the user's own protected folders, and
for the user's own unprotected folders.
Home group
You can set one talk group as the home group. The home group is
automatically included in scanning, and you can receive calls from the home
group even when the selected folder is not the folder of the home group. You
cannot receive calls from the home group if the home group scanning priority
is set to Off or scanning is switched off.
To communicate with the home group, you must be in the area of the home
group and have access rights to communicate with it.
Polaris_en_print.book Page 36 Tuesday, October 23, 2012 12:30 PM